** UPDATE **
Version 2.3 has been released
I have updated Raspbian server edition with a packagelist that I have stripped out of the 2012-12-16 version of Raspbian.
The packagelist can be found here, and the script to remove them can be found here. 242 packages were removed from the original Raspbian installation.
To use it, download the script and the package list to the same directory, and then run the command ./pkgs.sh pkgs.txt as root to remove the packages.
An image will be available soon.
An image is now available for download.
You can get it here
SHA Signatures for the 2 files
** Update **
Forgot to mention for any new Linux users, if you are using the image straight off the bat, you may want to regenerate the SSH Server keys for security reasons.
The commands to do this are :
ssh-keygen -f /etc/ssh/ssh_host_rsa_key -N '' -t rsa
ssh-keygen -f /etc/ssh/ssh_host_dsa_key -N '' -t dsa
Thank you very much for creating and maintaining Raspbian Server Edition. I have one request: could you generate a sha signature for the downloadable images. I trust you, I just don’t know if I trust Google’s security.
Thanks again for the great work.
No Problems, I’ll get that done asap 🙂
It’s good to have that complete list of useless packages when using RPI as a server like me. However I don’t understand why you remove some packages as aptitude or python. They are commonly used in terminal, specially python in RPI!
Obviously you can reinstall them with apt-get but maybe you could keep then in the server image.
It’s just an opinion 😉 Gook work anyway!
I was just stripping as much down as possible, aptitude isn’t essential and it’s easy enough to re-install it. Same with python, though that could have more uses.
I’m planning to do a few different sizes of Raspbian Server Edition in the future, so keep a lookout for those 🙂
This is a really nice img and I hope you continue to keep it updated, although I ended up not realizing there was a new edition of it out, is there a way to get E-mailed updates of the image? thanks if you can do that! it’s ok if you cant. Once more thank you for updating this script.
Thanks for the feedback 🙂 I have a RSS feed that you could subscribe to, or twitter you could follow ?
Otherwise I’ll look into setting an email list up 🙂
[…] The other SD-Card will be used for one of these Rasbian / Arch Linux / Raspbian Server Edition […]
Sir can u please tellme how to ssh wirelessly from putty i followed your par1 tutorial on setting up a wireless network.But whenever i connect to ty windows that network in my windows machinw it says that limited access and im using dnsmasq for forwarding ip address but still the same thing.Im trying to ssh wirelesssy via putty in windows and im using raspbian wheezy image.So can u please tell me how to ssh wirelessly into my pi…??
Do you have a keyboard and.screen connected to your Pi ? If you do, run ifconfig and check that wlan0 has an IP address
eth0 Link encap:Ethernet HWaddr b8:27:eb:57:b3:b7
inet addr:192.168.137.30 Bcast:192.168.137.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:131 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:13757 (13.4 KiB) TX bytes:7658 (7.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:1000 (1000.0 B) TX bytes:1000 (1000.0 B)
wlan0 Link encap:Ethernet HWaddr 00:22:75:76:88:9f
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
this is what i got when i run ifconfig
ryt now im connecting with a ethernet cable and ssh with putty.
Looks like wlan0 has no IP address. Check part 3A of the guide
okay thanks a lot for your reply..:)
and should i hav to set an static ip address for wlan0 ..??? please help me im new to this…
Yep. What you can do is in /etc/init.d/hostapd, you can add in a line to set the IP address. I’ll update the blog post in a few hours with specific instructions
okay fine thanks a lot…:)
Part 3A has been updated with what you need 🙂
yeah i got it thanks a lot for the post …..its working now i can ssh wirelessly into my pi..:)
Maybe you could add localepurge? Free’d up a couple of extra MB’s with it:
pi@raspberry ~ $ sudo localepurge
localepurge: Disk space freed in /usr/share/locale: 58628 KiB
localepurge: Disk space freed in /usr/share/man: 4792 KiB
Total disk space freed by localepurge: 63420 KiB
pi@raspberry ~ $ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 1.8G 635M 1.1G 38% /
/dev/root 1.8G 635M 1.1G 38% /
devtmpfs 117M 0 117M 0% /dev
tmpfs 24M 204K 24M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 47M 0 47M 0% /run/shm
/dev/mmcblk0p1 56M 17M 40M 30% /boot
No problems, I’ll add it into the next release.
Good work Sir, thank you.
Appreciate provided list of packages, can be usefull for me.
After using of your script i was able to free even more space with
sudo apt-get install localepurge
#remove unused pkgs
sudo apt-get autoremove
#clean pkg cache
sudo apt-get clean
sudo rm `find . -type f`
#remove unused icons
sudo rm /usr/share/icons/* -R
sudo rm /usr/share/doc/* -R
sudo rm /usr/share/man/* -R
i installed Raspbian Server Edition in sd card and run it on raspberry pi ..i got initial boot up screen and terminal as pi@raspberry and getting notice as : software on this raspberry pi is not fully configured please run sudo raspi-config and i did it ….but i am not getting GUI screen for it i typed startx also plz help me
Raspbian Server Edition does not have a GUI…
If you want Raspbian with a GUI, you will need to download the normal Raspbian distribution off the Raspberry Pi site.
Thank you sir ..ok actually i want to do video monitoring based on raspberry pi and using ffmpeg ..and it should be watched from anywhere ….can you provide any suggestions regarding this
Have a look at part 3 of my stream a webcam guide.
I’ve downloaded your image twice, burned the image twice all seems to be fine but my pi refuses to boot. Is the image ok?
Did you get version 2.2 ? Should probably get thr newest version which is 2.4
Thanks for keeping this updated!!
If I understand properly, your script reads the pkgs.txt and removes those packages. So I also can remove the packages I would like to keep from the list (Maybe a good thing to include in your instructions)?
Also, when running the script it removes 0 packages, the first echo from the scripts when run is ‘./pkgs.sh: line 7: $1: ambigous redirect’ . It then continues but essentially does nothing.
AH!….there is an unfortunate line break in your website that breaks up the command to run, I must run ‘./pkgs.sh pkgs.txt’